322-LFS中文資料WECO數(shù)據(jù)手冊PDF規(guī)格書

The screw/solder terminal strip 322-LFS in 10 mm pitch was designed for larger

cross-sections than version 302-LF-DS. It is available with 1 to 12 poles.

Mouldings of this type are open on the solder tag side but they can be connected

safe-to-touch as 2- and 3-pole version with cover caps A-323 and base plates

B-323. This will extend the creepage distance to the mounting surface.

Socket and solder tag are manufactured in one piece.

The screws are ready to be wired, secured against self-loosening and captive.

These strips can be combined with plug-in terminal strip 322-SV by plugging the

pins into the sockets and screwing them tight.

The wire protector of the “DS”-version reliably prevents damage to multi-wire

flexible conductors by the turning screw.

These terminals strips can be screw-mounted on a substrate