The Cypress MoBL-USB TX2 is a Universal Serial Bus (USB) specification revision 2.0 transceiver, serial and deserializer, to a parallel interface of either 16 bits at 30 MHz or eight bits at 60 MHz.

MoBL-USB? TX2 Features

■ UTMI-Compliant and USB 2.0 Certified for Device Operation

■ Operates in Both USB 2.0 High Speed (HS), 480 Mbits/second, and Full Speed (FS), 12 Mbits/second

■ Optimized for Seamless Interface with Intel? Monahans Applications Processors

■ Tristate Mode Enables Sharing of UTMI Bus with other Devices

■ Serial-to-Parallel and Parallel-to-Serial Conversions

■ 8-bit Unidirectional, 8-bit Bidirectional, or 16-bit Bidirectional External Data Interface

■ Synchronous Field and EOP Detection on Receive Packets

■ Synchronous Field and EOP Generation on Transmit Packets

■ Data and Clock Recovery from the USB Serial Stream

■ Bit Stuffing and Unstuffing; Bit Stuff Error Detection

■ Staging Register to Manage Data Rate Variation due to Bit Stuffing and Unstuffing

■ 16-bit 30 MHz and 8-bit 60 MHz Parallel Interface

■ Ability to Switch between FS and HS Terminations and Signaling

■ Supports Detection of USB Reset, Suspend, and Resume

■ Supports HS Identification and Detection as defined by the USB 2.0 Specification

■ Supports Transmission of Resume Signaling

■ 3.3V Operation

■ Two Package Options: 56-pin QFN and 56-pin VFBGA

■ All Required Terminations, Including 1.5 Kohm Pull Up on DPLUS, are Internal to Chip

■ Supports USB 2.0 Test Modes

Applications

Mobile Applications

■ Smart Phones

■ PDA Phones

■ Gaming Phones

■ MP3 players

■ Portable Media Players (PMP)

■ GPS Tracking Devices

Consumer Applications

■ Cameras

■ Scanners

■ DSL Modems

■ Memory Card Readers

Non-Consumer Applications

■ Networking

■ Wireless LAN

■ Home PNA