CY7C1620KV18-250BZXC集成電路（IC）的存儲器規(guī)格書PDF中文資料

Functional Description

The CY7C1618KV18, and CY7C1620KV18 are 1.8-V synchronous pipelined SRAM equipped with DDR II architecture. The DDR II consists of an SRAM core with advanced synchronous peripheral circuitry and a 1-bit burst counter. Addresses for read and write are latched on alternate rising edges of the input (K) clock. Write data is registered on the rising edges of both K and K. Read data is driven on the rising edges of C and C if provided, or on the rising edge of K and K if C/C are not provided. On CY7C1618KV18 and CY7C1620KV18, the burst counter takes in the least significant bit of the external address and bursts two 18-bit words in the case of CY7C1618KV18 and two 36-bit words in the case of CY7C1620KV18 sequentially into or out of the device.

Features

■ 144-Mbit density (8M × 18, 4M × 36)

■ 333 MHz clock for high bandwidth

■ Two-word burst for reducing address bus frequency

■ Double data rate (DDR) interfaces (data transferred at 666 MHz) at 333 MHz

■ Two input clocks (K and K) for precise DDR timing

? SRAM uses rising edges only

■ Two input clocks for output data (C and C) to minimize clock skew and flight time mismatches

■ Echo clocks (CQ and CQ) simplify data capture in high-speed systems

■ Synchronous internally self-timed writes

■ DDR II operates with 1.5-cycle read latency when DOFF is asserted high

■ Operates similar to DDR I device with one cycle read latency when DOFF is asserted low

■ 1.8-V core power supply with high-speed transceiver logic (HSTL) inputs and outputs

■ Variable drive HSTL output buffers

■ Expanded HSTL output voltage (1.4 V–VDD)

? Supports both 1.5-V and 1.8-V I/O supply

■ Available in 165-ball fine-pitch ball grid array (FBGA) package (15 × 17 × 1.4 mm)

■ Offered in Pb-free packages

■ JTAG 1149.1 compatible test access port

■ Phase locked loop (PLL) for accurate data placement