NCV7518MWATXG集成電路（IC）的電機驅動器控制器規格書PDF中文資料

NCV7518MWATXG屬于集成電路（IC）的電機驅動器控制器。由安森美半導體公司制造生產的NCV7518MWATXG電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

The NCV7518 / NCV7518A programmable six channel low-side

MOSFET pre-driver is one of a family of FLEXMOS automotive

grade products for driving logic-level MOSFETs. The product is

controllable by a combination of serial SPI and parallel inputs. The

device offers 3.3 V/ 5 V compatible inputs and the serial output driver

can be powered from either 3.3 V or 5 V. An internal power-on reset

provides controlled power up. A reset input allows external

re-initialization and an enable input allows all outputs and diagnostics

to be simultaneously disabled.

Each channel independently monitors its external MOSFET’s drain

voltage for fault conditions. Shorted load fault detection thresholds are

fully programmable using an externally programmed reference

voltage and a combination of discrete internal ratio values. The ratio

values are SPI selectable and allow different detection thresholds for

each channel.

Fault recovery operation for each channel is programmable and may

be selected for latch-off or automatic retry. Status information for each

channel is 3-bit encoded by fault type and is available through SPI

communication.

The FLEXMOS family of products offers application scalability

through choice of external MOSFETs.

Features

? 16-bit SPI with Parity and Frame Error Detection

? 3.3 V/5 V Compatible Parallel and Serial Control Inputs

? 3.3 V/5 V Compatible Serial Output Driver

? Reset and Enable Inputs

? Open-drain Fault Flag

? Priority Encoded Diagnostics with Latched Unique Fault Type Data

? Shorted Load, Short to GND

? Open Load with Fast Charge Option

? On and Off State Pulsed Mode Diagnostics

? Ratiometric Diagnostic References and Currents

? Programmable

? Shorted Load Fault Detection Thresholds

? Fault Recovery Mode

? Blanking Timers

? Wettable Flanks Pb-Free Packaging

? NCV Prefix for Automotive and Other Applications Requiring

Unique Site and Control Change Requirements; AEC-Q100 Qualified

and PPAP Capable

? This is a Pb-Free Device

Benefits

? Scalable to Load by Choice of External MOSFET