100030580中文資料圖爾克數(shù)據(jù)手冊PDF規(guī)格書

The cabinet guard IMX12-CCM05-MTI-1I2THC/L/CC monitors preset environmental limits

inside the control cabinet. The environmental

conditions are detected by integrated humidity and temperature sensors, and a triangulation sensor that detects if the control cabinet

door is not closed correctly. If the measured

values exceed or fall below the set limit values,a fault signal appears on the LED display

or is reported to the higher-level control system via the switching outputs and the HART

interface.

The device is supplied loop powered from the

4…20 mA current interface. When used in

Ex areas, the device can be supplied via the

TURCK isolating transducer IMX12-AI01-… .

Teach-in can be performed manually on the

device; extended parameterization is possible

via the HART interface.

The device is equipped with eight spring-type

terminals for connecting the HART interface or

power supply and switching outputs and can

be mounted on a DIN rail acc. to EN 60715.

Furthermore, the device has four front-mounted LEDs to display the operating status

(green), the fault signal (red flashing acc. to

NE43) and the states of the switching outputs

(2 x yellow).

The device is equipped with removable

spring-type terminals.

■ 2 potential-free contacts

■ Temperature detection

■ Moisture detection

■ Detection of distance to control cabinet

door

■ Galvanic isolation of outputs (A1/A2)

■ Removable spring-type terminals

■ ATEX, IECEx