DESCRIPTION

The 1N5728 thru 1N5757 series of 0.5 watt Zener Voltage Regulators provides a selection from 4.7 to 75 volts in standard 5 tolerances as well as tighter tolerances identified by a “C” or “D” suffix letter on the part number. These glass axial-leaded DO-35 Zeners are also available with an internal-metallurgical-bond option by adding a “-1” suffix. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

FEATURES

? JEDEC registered 1N5728 to 1N5757 series

? Internal metallurgical bond option available by adding a “-1” suffix

? Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers with “-1” suffix

? Surface Mount equivalents are also available in DO-213AA by adding a UR or UR-1 suffix, e.g. 1N5728UR, 1N5746UR-1, etc. (see separate data sheets)

? DO-7 glass body axial-leaded Zener equivalents are also available

APPLICATIONS / BENEFITS

? Regulates voltage over a broad operating

current and temperature range

? Extensive selection from 4.7 to 75 V

? Standard voltage tolerances of plus/minus 5 with a B suffix

? Tight tolerances available in plus or minus 2

or 1 with C or D suffix respectively

? Flexible axial-lead mounting terminals

? Nonsensitive to ESD per MIL-STD-750 Method 1020

? Minimal capacitance (see Figure 3)

? Inherently radiation hard as described in Microsemi MicroNote 050