2201813盒子外殼機架的盒組件規(guī)格書PDF中文資料

2201813屬于盒子外殼機架的盒組件。由德國菲尼克斯電氣集團制造生產(chǎn)的2201813盒組件盒組件可為外殼和盒增加功能，例如抽屜、安裝功能、側面板、印刷電路板、底座、擱板、端子、窗口、板、電源入口、過濾器、DIN 導軌等。盒組件可按制造商、產(chǎn)品系列、增加的功能、尺寸、顏色、成分材料、相關適用產(chǎn)品進行選擇。

Description

The housings of the ME-IO 18,8... product range consist of

a 18.8 mm wide lower housing part with space for the PCB

assembly.

The lower housing part can be combined with various housing

covers. The lower housing part is subdivided into 9 units

(1 Unit = 11 mm). These units can be combined with connectors

and housing covers in various ways.

The connectors correspond to a unit and have a push-in

connection. There are 4-pos. connectors for conductor

cross sections of up to 2.5 mm

2

, and 6-pos. connectors for

conductor cross sections of up to 1.5 mm

2

. Partially assembled

or TWIN variants are also available. All in all, the 4-pos.

connectors allow for a maximum of 36 positions in a single

housing. The 6-pos. connectors even allow for up to 54 positions.

As a counter-part to the connectors, there are headers

in 2 or 3 unit versions for soldering onto the PCB.

The housing covers in 2 to 7 unit versions are especially

suited for installing connection systems such as USB or

D-SUB as well as display and operating elements. We

would be glad to install the required openings for you.

The housings can be snapped onto an NS 35 DIN rail.

It is possible to use the housings with a DIN rail connector

by means of which communication can be established between

the housings, or the supply voltage can be transmitted.