2403869中文資料菲尼克斯電氣數(shù)據(jù)手冊(cè)PDF規(guī)格書

Axioline F, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

Product Description

The bus coupler is intended for use within a PROFINET network.

The bus coupler creates the link to the Axioline F I/O system and the industrial I/O signals connected to it.

Up to 63 Axioline F devices can be connected to the bus coupler.

Device descriptions for Phoenix Contact controllers are integral parts of the engineering tools PC Worx and PLCnext Engineer.

Corresponding GSDML files are available for integrating the Axioline F station into other programming systems.

These files can be downloaded at: phoenixcontact.net/product/2403869.

Your advantages

2 Ethernet ports (with integrated switch)

Conformance with PROFINET specification V2.3

Supports PROFIsafe

Supports PROFIenergy

Supports PROFINET S2 system redundancy (firmware version 1.30 or later)

PROFINET RT and IRT

Minimum cycle time of PROFINET for RT and IRT is 250 μs

Firmware can be updated

Runtime in bus coupler is negligible (almost 0 μs)

Typical cycle time of the Axioline F local bus is around 10 μs

Web-based management

Supports the operation of Axioline Smart Elements

Supports the AXL SE SC slot cover (firmware version 1.30 and later)

Supports IOL-CONF (firmware version 1.30 and later)

Supports Diag+

Safe analog value processing with SAFE AI and other components