25Q16BSIG中文資料兆易創(chuàng)新數(shù)據(jù)手冊PDF規(guī)格書

FEATURES

◆ 16M-bit Serial Flash

-2048K-byte

-256 bytes per programmable page

◆ Standard, Dual, Quad SPI

-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#

-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#

-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3

◆ High Speed Clock Frequency

-120MHz for fast read with 30PF load

-Dual I/O Data transfer up to 180Mbits/s

-Quad I/O Data transfer up to 360Mbits/s

◆ Software/Hardware Write Protection

-Write protect all/portion of memory via software

-Enable/Disable protection with WP# Pin

-Top or Bottom, Sector or Block selection

◆ Minimum 100,000 Program/Erase Cycles

Note: 1.Please contact Gigadevice for details.

◆ Program/Erase Speed

-Page Program time: 0.7ms typical

-Sector Erase time: 100ms typical

-Block Erase time: 0.3/0.4/0.8s typical

-Chip Erase time: 16s typical

◆ Flexible Architecture

-Sector of 4K-byte

-Block of 32/64/128K-byte

◆ Low Power Consumption

-20mA maximum active current

-5uA maximum power down current

◆ Advanced security Features(1)

-16-Bit Customer ID

-Security Architecture

◆ Single Power Supply Voltage

-Full voltage range:2.7~3.6V

GENERAL DESCRIPTION

The GD25Q16 (16M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the

Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O

data is transferred with speed of 180Mbits/s and the Quad I/O & Quad output data is transferred with speed of

360Mbits/s.