25VF016B中文資料微芯科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

Product Description

The 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with improved operating frequency and even lower power consumption than the original SST25VFxxxA devices. SST25VF016B SPI serial flash memories are manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Features

? Single Voltage Read and Write Operations

- 2.7-3.6V

? Serial Interface Architecture

- SPI Compatible: Mode 0 and Mode 3

? High Speed Clock Frequency

- Up to 50 MHz

? Superior Reliability

- Endurance: 100,000 Cycles (typical)

- Greater than 100 years Data Retention

? Low Power Consumption:

- Active Read Current: 10 mA (typical)

- Standby Current: 5 μA (typical)

? Flexible Erase Capability

- Uniform 4 KByte sectors

- Uniform 32 KByte overlay blocks

- Uniform 64 KByte overlay blocks

? Fast Erase and Byte-Program:

- Chip-Erase Time: 35 ms (typical)

- Sector-/Block-Erase Time: 18 ms (typical)

- Byte-Program Time: 7 μs (typical)

? Auto Address Increment (AAI) Programming

- Decrease total chip programming time over Byte-Program operations

? End-of-Write Detection

- Software polling the BUSY bit in Status Register

- Busy Status readout on SO pin in AAI Mode

? Hold Pin (HOLD#)

- Suspends a serial sequence to the memory without deselecting the device

? Write Protection (WP#)

- Enables/Disables the Lock-Down function of the status register

? Software Write Protection

- Write protection through Block-Protection bits in status register

? Temperature Range

- Commercial: 0°C to +70°C

- Industrial: -40°C to +85°C

? Packages Available

- 8-lead SOIC (200 mils)

- 8-contact WSON (6mm x 5mm)

? All devices are RoHS compliant