2708562中文資料菲尼克斯電氣數據手冊PDF規格書

FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems

(SUCONET K, MODBUS ...) up to 500 kbps, NRZ coding, termination device with an FO

interface (SC-Duplex), 1300 nm, for fiberglass cable

Product Description

The PSI-MOS-RS485W2/FO... FO converters convert the electrical data signal into an optical one by protocol transparent means. The

integrated optical diagnostics allow permanent monitoring of the FO paths during installation and also during operation. The floating switch contact

is activated when the signal output on the fiber optic paths drops to a critical level. The PSI-MOS-RS485W2/FO... E termination

devices convert an RS-485 interface to a fiber optic cable. They are ideal for point-to-point connections.

Your advantages

? Connections can be plugged in via a COMBICON screw terminal block

? Supply voltage and data signals routed through the DIN rail connectors

? Can be combined with the PSI copper repeater in a modular way using DIN rail connectors

? Automatic data rate detection or fixed data rate setting via DIP switches

? Redundant power supply possible by means of optional system power supply unit

? High-quality electrical isolation between all interfaces (RS-485 // fiber optic ports // power supply // DIN rail connector)

? Approved for use in zone 2

? Floating switch contact for advance warning of critical FO paths

? Integrated optical diagnostics for continuous monitoring of FO paths

? Suitable for data rates up to 500 kbps