2938235工業自動化與控制的配件規格書PDF中文資料

2938235屬于工業自動化與控制的配件。由德國菲尼克斯電氣集團制造生產的2938235配件與此類別中其他器件一起使用的輔助產品。

Description

QUINT POWER 48 DC is a universal power supply unit of

240 W ... 960 W. In case of a regulated and adjustable output

voltage of 30 V DC ... 56 V DC, output currents of 5 A, 10 A

and 20 A are available.

The devices are built as primary switched-mode controllers

and have a high degree of efficiency, due to which the heat

loss is limited to a minimum.

The high operational safety is guaranteed reliably in unstable

global networks as well. QUINT POWER also functions in

applications where static voltage dips, transient failures of

the supply voltage unit or phase failure are to be expected.

Generously dimensioned capacitors guarantee a mains buffering

of more than 20 ms under full load. All three-phase

QUINT POWER provide full output power, even in the event

of a long-term phase failure.

A reliable starting of complex loads is ensured by a power reserve

of up to 50 – the POWER BOOST.

A preventive function monitoring diagnoses improper operating

states and minimizes downtimes in your system. For remote

monitoring of this state, an active transistor switching

output and a floating relay contact are available.

– Universal power supply unit with an extensive product

range, including special versions and accessories

– Can be used worldwide in all industrial sectors due to a

wide-range input and an international approval package

– High operating safety due to long mains buffering under

full load and high MTBF (> 500,000 h)

– Reliable starting of heavy loads with high inrush currents

through the POWER BOOST power reserve

– High system availability of all three-phase devices, even

if one phase fails permanently

– Active function monitoring through switching output and

preventive function monitoring through floating relay

contact for remote diagnosis

– Parallel connection possible for increased performance

and redundancy

– Simplified commissioning with LED function monitoring