48741標簽標志護欄標識的標簽規格書PDF中文資料

Description

Monitors both battery voltage and ignition status, shutting

down non-critical loads when the cutoff voltage is reached, or

at the set time after the ignition is turned off. It is a timer and

voltage sensor in one easy-to-connect unit. If either the cutoff

voltage or time limit is reached, the FlexMod will shut down

the auxiliary loads, providing double protection.

Features and Benefits

? Preserves starting power; eliminates downtime and jump

starts due to dead batteries. Simultaneous time and voltage

monitoring protects starting.

? Monitors voltage and time simultaneously, providing double

the protection to batteries. Battery will not be drained if

battery voltage gets low before timer has run out.

? Auto-ranging to automatically sense the voltage of the

system (12 or 24V) and selects the presets appropriate to

that voltage.

? Waterproof, dustproof and vibration-proof. Sealed to IP67

so it can mount on a vehicle even in places where roadsplash

is a problem.

? Ultra low 1mA standby current means minimal battery

drain – especially valuable when vehicle is in storage or not

in use.

? Factory programmable unit is highly versatile: with a broad

range of presets available to match any special application.

? Rated for more than 1,000,000 on-off cycles – unit

operates for the lifetime of the vehicle. Solid state

technology gives long life and low maintenance.

? Compact design (4 x 3 x 1”) – Uses less space; mounts

outside or inside. Saves money by eliminating other

hardware, and provides better wire routing