60312202114509連接器互連器件的同軸連接器（RF）組件規格書PDF中文資料

60312202114509屬于連接器互連器件的同軸連接器（RF）組件。由伍爾特集團制造生產的60312202114509同軸連接器（RF）組件同軸電纜的里層導體由絕緣材料包裹，外層則包裹另一層環形導體和絕緣材料。同軸連接器系列產品是與這類電纜材料配合使用的互連器件，旨在保持特征阻抗在整根電纜上的一致性，以便用作高頻信號的傳輸線。

General:

? This electronic component is designed and developed with the intention for use in general electronics equipment.

? Before incorporating the components into any equipment in the field such as military, aerospace, aviation, nuclear control, submarine,

transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information

network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body,

Wurth Elektronik must be asked for a written approval.

? In addition, even electronic component in general electronic equipment, when used in electrical circuits that require high safety,

reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed by the user before usage.

? The connector is designed and manufactured to be used within the datasheet specified values.

? Do not use the connector outside the datasheet specifications.

? Prevent any damage or scratches on the connector, especially on the actuator.

? Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCB′s).

? The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specification for standard products do also apply to customer specific products.

? Würth Elektronik products are qualified according to international standards which are listed into each product reliability report.All

products characteristics are therefore given according to results obtained throughout these detailed test protocols. May any product

characteristic be qualified by the customer, out of given Würth Elektronik specifications, Würth Elektronik cannot ensure its validity and

sustainability over time.

? The Connectors are designed to be used along with Würth Elektronik counterparts and tools. Würth Elektronik cannot insure the

reliability of these components while being used with other products.