60800213421連接器互連器件的分路器跳線規格書PDF中文資料

60800213421屬于連接器互連器件的分路器跳線。由伍爾特集團制造生產的60800213421分路器，跳線分路器或跳線旨在連接兩個隔開一定距離的引腳觸頭以實現電氣連接。類型有頂部封閉/夾緊、絕緣、非絕緣和頂部開放/夾緊，間距為 0.050" (1.27 mm) 至 1.00" (25.40 mm)，針腳數從 1 (1 x 1) 到 48 (1 x 24) 或 4 (2 x 2) 到 26 (2 x 13) 不等。

General:

? This electronic component is designed and developed with the intention for use in general electronics equipment.

? Before incorporating the components into any equipment in the field such as aerospace, aviation, nuclear control, submarine,

transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information

network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body,

Wurth Elektronik must be asked for a written approval.

? In addition, even electronic component in general electronic equipment, when used in electrical circuits that require high safety,

reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed by the user before usage.

? The connector is designed and manufactured to be used within the datasheet specified values.

? Do not use the connector outside the datasheet specifications.

? Prevent any damage or scratches on the connector, especially on the actuator.

? Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCB′s).

? The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specification for standard products do also apply to customer specific products.

? The Connectors are designed to be used along with Würth Elektronik counterparts and tools. Würth Elektronik cannot insure the

reliability of these components while being used with other products.