74275013濾波器的鐵氧體磁珠芯片規格書PDF中文資料

74275013屬于濾波器的鐵氧體磁珠芯片。由伍爾特集團制造生產的74275013鐵氧體磁珠和芯片鐵氧體磁芯是旨在防止高頻噪聲或 EMI（電磁干擾）的設備。這些鐵氧體磁芯用于放置在電路內。關鍵特征包括濾波器類型（差分、信號或電源）、線路數、最大額定電流、阻抗和指定頻率，以及安裝類型（自由懸掛、表面貼裝或通孔）。

General Information:

Test conditions of Electrical Properties: +20 °C, 33 RH if not specified differently

General:

? This electronic component is designed and developed with the intention for use in general electronic equipment.

? Würth Elektronik must be asked for a written approval (following the certain PPAP level procedure) before incorporating the components

into any equipment in the field such as military, aerospace, aviation, nuclear control, submarine, transportation, (automotive control,

train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and

reliability are especially required and/or if there is possibility of direct damage or injury to human body.

? In addition, even electronic components in general electronic equipment require a sufficient reliability evaluation-check for the safety,

when used in electrical circuits that require high safety, reliability functions or performance, prior to usage.

? The electronic component is designed and manufactured to be used within the datasheets’ specified values. The usage and operation of

the product within ambient conditions, which probably dissolve or harm the wire isolation, has to be avoided.

? Direct mechanical impact to the product shall be prevented as the material of the core could flake or in the worst case it could break.

? Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth

Elektronik does not guarantee any customer qualified product characteristic, beyond Würth Elektronik specifications, for its validity and

sustainability over time.

? The responsibility for the function of the application of the customer specific products and use in a particular customer design is always

the full and autonomous responsibility of the customer. All technical specification for standard products also apply to customer specific

products.