74ABT646CMSA集成電路（IC）的緩沖器驅(qū)動器接收器收發(fā)器規(guī)格書PDF中文資料

General Description

The ABT646 consists of bus transceiver circuits with 3-STATE, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes to a high logic level. Control OE and direction pins are provided to control the transceiver function. In the transceiver mode, data present at the high impedance port may be stored in either the A or the B register or in both. The select controls can multiplex stored and real-time (transparent mode) data. The direction control determines which bus will receive data when the enable control OE is Active LOW. In the isolation mode (control OE HIGH), A data may be stored in the B register and/or B data may be stored in the A register.

Features

■ Independent registers for A and B buses

■ Multiplexed real-time and stored data

■ A and B output sink capability of 64 mA, source capability of 32 mA

■ Guaranteed output skew

■ Guaranteed multiple output switching specifications

■ Output switching specified for both 50 pF and 250 pF loads

■ Guaranteed simultaneous switching noise level and

dynamic threshold performance

■ Guaranteed latchup protection

■ High impedance glitch free bus loading during entire

power up and power down cycle

■ Nondestructive hot insertion capability