74ALVCH16600集成電路（IC）的通用總線功能規(guī)格書PDF中文資料

DESCRIPTION

The 74ALVCH16600 is an 18-bit universal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is High. When LEAB is Low, the A data is latched if CPAB is held at a High or Low logic level. If LEAB is Low, the A-bus data is stored in the latch/flip-flop on the High-to-Low transition of CPAB. When OEAB is Low, the outputs are active. When OEAB is High, the outputs are in the high-impedance state. The High clock can be controlled with the clock-enable inputs (CEBA/CEAB).

FEATURES

? Complies with JEDEC standard no. 8-1A.

? CMOS low power consumption

? Direct interface with TTL levels

? Current drive ± 24 mA at 3.0 V

? All inputs have bus hold circuitry

? Output drive capability 50? transmission lines @ 85°C

? MULTIBYTETM flow-through standard pin-out architecture

? Low inductance multiple VCC and ground pins for minimum noise and ground bounce