74HC4538PW-Q100集成電路（IC）的多諧振蕩器規(guī)格書PDF中文資料

General description

The 74HC4538-Q100 is a dual retriggerable-resettable monostable multivibrator. Each multivibrator has two trigger/retrigger inputs (nA and nB), a direct reset input (nCD), two complementary outputs (nQ and nQ), and two pins (nREXT/CEXT and nCEXT) for connecting the external timing components CEXT and REXT. Typical pulse width variation over temperature range is ± 0.2 . The device may be triggered by either the positive or the negative edges of the input pulse. The duration and accuracy of the output pulse are determined by the external timing components CEXT and REXT. The output pulse width (TW) is equal to 0.7 × REXT × CEXT. The linear design techniques guarantee precise control of the output pulse width. A LOW level at nCD terminates the output pulse immediately. Schmitt-trigger action in the trigger inputs makes the circuit highly tolerant to slower rise and fall times. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

– Specified from -40 °C to +85 °C and from -40 °C to +125 °C

? Tolerant of slow trigger rise and fall times

? Separate reset inputs

? Triggering from falling or rising edge

? Complies with JEDEC standard no. 7A

? CMOS input levels:

? ESD protection:

– MIL-STD-883, method 3015 exceeds 2000 V

– HBM JESD22-A114F exceeds 2000 V

– MM JESD22-A115-A exceeds 200 V

? Multiple package options