1. General description

The 74HC390; 74HCT390 is a dual 4-bit decade ripple counter divided into four separately clocked

sections. The counters have two divide-by-2 sections and two divide-by-5 sections. These sections

share an asynchronous master reset input (nMR) and can be used in a BCD decade or bi-quinary

configuration. If master reset inputs (1MR and 2MR) are used to simultaneously clear all 8 bits of

the counter, a number of counting configurations are possible within one package. The separate

clocks (nCP0 and nCP1) of each section allow ripple counter or frequency division applications of

divide-by-2, 4, 5, 10, 20, 25, 50 or 100. Each section is triggered by the HIGH-to-LOW transition

of the clock inputs (nCP0 and nCP1). For BCD decade operation, the nQ0 output is connected

to the nCP1 input of the divide-by-5 section. For bi-quinary decade operation, the nQ3 output is

connected to the nCP0 input and nQ0 becomes the decade output. A HIGH on the nMR input

overrides the clocks and sets the four outputs LOW. This device features reduced input threshold

levels to allow interfacing to TTL logic levels. Inputs also include clamp diodes, this enables the use

of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

? Input levels:

? For 74HC390: CMOS level

? For 74HCT390: TTL level

? Two BCD decade or bi-quinary counters

? One device can be configured to divide-by-2, 4, 5, 10, 20, 25, 50 or 100

? Two master reset inputs to clear each decade counter individually

? Supply voltage range from 4.5 V to 5.5 V

? High noise immunity

? Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

? Complies with JEDEC standard JESD7A (4.5 V to 5.5 V)

? ESD protection:

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

74HCT390屬于集成電路（IC） > 計數器，除法器。安世半導體(中國)有限公司制造生產的74HCT390計數器，除法器計數器和除法器 IC 是數字邏輯器件，可對輸入發生的邏輯轉換進行計數，然后使用多個并行輸出重新發送累加的計數，和/或生成單個輸出信號轉換，從而對應用某些整數數量輸入信號轉換進行響應。除了簡單的事件計數，它們還可用于各種頻率合成應用。