74HCT4053D中文資料東芝數據手冊PDF規格書

Functional Description

? Triple 2-Channel Analog Multiplexer/Demultiplexer

General

The 74HCT4053D are high speed CMOS ANALOG MULTIPLEXER/DEMULTIPLEXER fabricated with silicon

gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining

the CMOS low power dissipation.

This device may be used as a level converter for interfacing TTL or NMOS to High Speed CMOS. This inputs

are compatible with TTL, NMOS and CMOS output voltage levels.

The 74HCT4053D has a 2 channel × 3 configuration.

The digital signal to the control terminal turns ON the corresponding switch of each channel a large amplitude

signal (VCC - VEE) can then be switched by the small logical amplitude (VCC - GND) control signal.

For example, in the case of VCC = 5 V, GND = 0 V, VEE = -5 V, signals between -5 V and +5 V can be switched

from the logical circuit with a single power supply of 5 V. As the ON-resistance of each switch is low, they can be

connected to circuits with low input impedance.

All inputs are equipped with protection circuits against static discharge or transient excess voltage.

Features

(1) Wide operating temperature range: Topr = -40 to 125 (Note 1)

(2) Low power dissipation: ICC = 4.0 μA (max) (VCC = 5.5 V, VEE = GND, Ta = 25 )

(3) Compatible with TTL output: VIH = 2.0 V (min), VIL = 0.8 V (max)

(4) Wide interfacing ability: LSTTL, NMOS, CMOS

(5) Low ON-resistance: RON = 50 Ω (typ.) at VCC - VEE = 9 V

(6) High degree of linearity: THD = 0.020 (typ.) at VCC - VEE = 9 V

(7) Pin and function compatible with 4053B