1. General description

The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs.

The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state

of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH

clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state.

Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes.

This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

? Wide supply voltage range from 2.0 V to 6.0 V

? CMOS low power dissipation

? High noise immunity

? Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

? Complies with JEDEC standards:

? JESD8C (2.7 V to 3.6 V)

? JESD7A (2.0 V to 6.0 V)

? Input levels:

? For 74HC574: CMOS level

? For 74HCT574: TTL level

? 3-state non-inverting outputs for bus oriented applications

? 8-bit positive, edge-triggered register

? Common 3-state output enable input

? ESD protection:

? ? HBM JESD22-A114F exceeds 2 kV

? MM JESD22-A115-A exceeds 200 V

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

74HCT574屬于集成電路（IC） > 觸發器。安世半導體(中國)有限公司制造生產的74HCT574觸發器觸發器是能夠存儲單個邏輯狀態或信息“位”的基本數字存儲器件。這些器件至少有兩個輸入；一個或多個用于傳遞要存儲的數據，另一個用于指示存儲該數據的時間點。不同的觸發器類型，例如 D（延遲）、SR（置位復位）和 JK，對提供給其輸入的信號有不同的響應，可用于實現不同的邏輯功能。這些器件與鎖存器的不同之處在于它們是邊緣敏感器件，其保持的邏輯狀態僅在接收到有效時鐘信號時才會改變。