1. General description

The 74HC7541; 74HCT7541 is an 8-bit buffer/line driver with Schmitt-trigger inputs and 3-state

outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the

outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use

of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs

transform slowly changing input signals into sharply defined jitter-free output signals.

2. Features and benefits

? Wide supply voltage range from 2.0 to 6.0 V

? CMOS low power dissipation

? High noise immunity

? Unlimited input rise and fall times

? Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

? Complies with JEDEC standards:

? JESD8C (2.7 V to 3.6 V)

? JESD7A (2.0 V to 6.0 V)

? Non-inverting outputs

? Input levels:

? For 74HC7541: CMOS level

? For 74HCT7541: TTL level

? ESD protection:

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

74HCT7541PW屬于集成電路（IC） > 緩沖器，驅動器，接收器，收發(fā)器。安世半導體(中國)有限公司制造生產的74HCT7541PW緩沖器，驅動器，接收器，收發(fā)器邏輯緩沖器、驅動器、接收器和收發(fā)器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發(fā)器允許在數據總線之間進行隔離通信。