8644中文資料寶帝流體控制系統(tǒng)數(shù)據(jù)手冊PDF規(guī)格書

The electromagnetic flowmeter Type 8045 is made up of an electronic module

including a backlit display, operating keys and a sensor consisting of PVDF or

stainless steel material. It has been designed to measure a flow rate of neutral and

slightly aggressive fluids with a conductivity of more than 20 μS/cm in DN 06…

DN 400 pipes.

The Type 8045 is equipped with a 4…20 mA output, a digital output (pulse output

by default). Some versions are equipped with two relay outputs and one digital

input. Two independent totalizers allow counting the flow rate.

This flowmeter is available either with a G 2 connection with a PVDF sensor or, a

G 2 or clamp connection with a stainless steel sensor which are designed for use

with an Insertion fitting Type S020.

The version with a stainless steel sensor can be used in applications with higher

pressures (PN 16) and higher temperatures (110 °C). The version with Alloy C22

electrodes has been designed for applications with aggressive fluids (chemicals)

and especially sea water applications.

Type description