首頁>A25D80TMX8VR>規格書詳情
A25D80TMX8VR中文資料創瑞科技數據手冊PDF規格書
A25D80TMX8VR規格書詳情
DESCRIPTION
The A25D80 is 8M-bit Serial Peripheral Interface (SPI) Flash memory, and supports the Dual SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI),I/O1 (SO). The Dual Output data is transferred with speed of 108Mbits/s. The device uses a single low voltage power supply, ranging from 2.7 Volt to 3.6 Volt.
Additionally, the device supports JEDEC standard manufacturer and device ID.
The A25D80 is available in SOP8 TSSOP8 ,
DFN8(3x3) and DFN8 ( packages.
FEATURES
? Serial Peripheral Interface(SPI)
-
Standard SPI: SCLK, /CS, SI, SO, /WP
-
Dual SPI: SCLK, /CS, IO0, IO1, /WP
? Read
-
Normal Read (Serial): 55MHz clock rate
-
Fast Read (Serial): 108MHz clock rate
-
Dual Read: 108M H z clock rate
? Program
-
Serial input Page Program up to 256bytes
? Erase
-
Block erase (64/32 k B)
-
Sector erase (4 k B)
-
Chip erase
? Program/Erase Speed
-
Page Program time: 0.7ms typical
-
Sector Erase time 100ms typical
-
Block Erase time: 0.3/0.5s typical
-
Chip Erase time: 8s typical
? Flexible Architecture
-
Sector of 4 k byte
-
Block of 32/64 k byte
? Low Power Consumptio n
-
20mA maximum active current
-
5uA maximum power down current
? Software/Hardware Write Protection
-
Enable/Disable protection with WPPin
-
Write protect all/portion of memory via software
-
Top or Bottom, Sector or Block selection
? Single Supply Voltage
-
Full voltage range: 2.7~3.6V
? Temperature Range
-
Commercial (0 to +70
-
Industrial ( 40 to +85
? Cycling Endurance/Data Retention
-
Typical 100k Program Erase cycles on any
sector
-
Typical 20 year data retention
? Available in S OP8 , TSSOP8 , DFN8( and
DFN 8 ( p ackage s
