A31315傳感器變送器的位置傳感器-角度、線性位置測量規格書PDF中文資料

A31315屬于傳感器變送器的位置傳感器-角度、線性位置測量。由Allegro MicroSystems制造生產的A31315位置傳感器 - 角度、線性位置測量角度和線性位置測量傳感器使用電容、霍爾效應、電感、LVDT、LVIT、磁阻、光學或電阻技術，來確定傳感器的致動器相對于參考點的位置。角度位置傳感器可根據有限或連續旋轉范圍內的電氣或機械范圍進行區分。線性位置傳感器可根據 0 到 400 英寸的范圍進行區分。其他考慮因素包括致動器類型、輸出類型和信號、安裝類型和線性度。

FEATURES AND BENEFITS

3D magnetic sensor enables flexible mechanical

integration for contactless linear and rotary position

applications

? Configurable signal path processing and on-chip angle

calculation for accurate 360° and short stroke (<360°)

rotary applications

? Multiple programmable linearization options for

maximum measurement accuracy:

□ Piecewise-linear and binning modes

□ Up to 33-point fixed position

□ Up to 22-point programmable positions

? Ratiometric Analog, PWM, or SENT (SAE J2716)

output formats

? Integrated IC diagnostics for high reliability

? Developed in accordance with ISO 26262 requirements

for hardware product development for use in safetycritical applications

? Supports operation in harsh conditions, required for

automotive and industrial applications

□ AEC-Q100 Grade 0 qualified

□ –40°C to 150°C temperature range

□ 4.5 to 5.5 V supply operating range

□ Over- and reverse-voltage protection

? Multiple package options available:

□ Single die surface mount (SOIC-8)

□ Dual (full redundant) stacked die surface mount

(TSSOP-14)

APPLICATIONS

? Contact-less linear and rotary position sensor

? Throttle, valve, and cylinder position sensor

? Pedal position sensor

? Transmission position (fork/clutch, shifter, park lock)

DESCRIPTION

The A31315 3DMAG? position sensor is designed for on-axis

and off-axis rotary as well as linear stroke position measurement

in automotive, industrial, and consumer applications.

This sensor integrates vertical and planar Hall-effect elements

with precision temperature-compensating circuitry to detect

two out of three magnetic field components (X, Y, and Z).

Using configurable signal processing, linearization, and

angle calculation allows the A31315 to accurately resolve the

absolute rotary (full 360° and short-stroke <360°) or linear

position of a moving magnetic target.

The A31315 features ratiometric analog, PWM, or SENT

(SAE J2716) interface options to output the angle between

the two factory-selected axes or the field from a single axis.

In addition, the SENT interface provides the option to output

the field measurement from both channels.

On-chip EEPROM technology, capable of supporting up to

100 write cycles, is integrated for flexible programming of

configuration and calibration parameters and includes 92 bits

provided for customer device identification purposes.

The A31315 contains on-chip diagnostic features required for

high reliability automotive applications, including monitors of

both internal and external fault conditions.

Developed in accordance with ISO 26262 as a hardware safety

element out of context (SEooC) with ASIL B (single die) and

ASIL D (dual die) capability for use in automotive safety-related

systems when integrated and used in the manner prescribed in

the applicable safety manual and datasheet.

The A31315 is available as a single die in the SOIC-8 package

and stacked dual die in the TSSOP-14 package for applications

that require full redundancy