A5348集成電路（IC）的傳感器檢測器接口規格書PDF中文資料

A5348屬于集成電路（IC）的傳感器檢測器接口。由Allegro MicroSystems制造生產的A5348傳感器和檢測器接口該系列產品可執行信號調節、數據轉換、激勵生成和/或各種將傳感器或變送器機構連接到主機設備所需的其他功能。示例包括用于 CCD 圖像傳感器的控制器、用于 4-20 mA 接口和類似應用的電流變送器、超聲變送器前端、惠斯通電橋接口等。

Description

The A5348 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke all units will sound their alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector.

The internal oscillator and timing circuitry keep standby power to a minimum by powering down the device for 1.66 seconds and sensing for smoke for only 10 ms. Every 24 on-off cycles, a check is made for a low battery condition. By substituting other types of sensors or a switch for the ionization detector, this very-low–power device can be used in numerous other battery-operated safety/security applications.

Features and Benefits

? Low average standby current for long battery life

? Interconnect up to 125 detectors

? Piezoelectric horn driver

? Guard outputs for detector input

? Pulse testing for low battery

? Power-on reset (POR)

? Internal reverse battery protection

? Timer (Hush) mode for enabling reduced sensitivity period

? Built-in hysteresis reduces false triggering