A6278ELPTR-T集成電路（IC）的LED驅動器規格書PDF中文資料

A6278ELPTR-T屬于集成電路（IC）的LED驅動器。由Allegro MicroSystems制造生產的A6278ELPTR-TLED 驅動器器件屬于 LED 驅動器電源管理集成電路 (PMIC) 系列，可通過標稱固定電壓的電源為負載（通常為發光二極管）提供電流，并且電流可控。它與用于電壓調節的類似產品的主要區別在于，這類器件提供較低的反饋電壓（以提高系統能效），而且通常可對器件工作點進行外部控制，可在照明應用中用于實現調光功能。

Description

The A6278 and A6279 devices are specifically designed for LED display applications. Each of these BiCMOS devices includes a CMOS shift register, accompanying data latches, and NPN constant-current sink drivers. The A6278 contains 8 sink drivers, while there are 16 in the A6279.

The CMOS shift register and latches allow direct interfacing with microprocessor-based systems. With a 3.3 or 5 V logic supply, typical serial data-input rates can reach up to 25 MHz. The LED drive current is determined by the user’s selection of a single resistor. A CMOS serial data output permits cascading between multiple devices in applications requiring additional drive lines. Open LED connections can be detected and signaled back to the host microprocessor through the SERIAL DATA OUT pin.

Features and Benefits

? 3.0 to 5.5 V logic supply range

? Schmitt trigger inputs for improved noise immunity

? Power-On Reset (POR)

? Up to 90 mA constant-current sinking outputs

? LED open circuit detection

? Low-power CMOS logic and latches

? High data input rate

? 20 ns typical staggering delay on the outputs

? Internal UVLO and thermal shutdown (TSD) circuitry