ACS704ELC-015傳感器變送器的電流傳感器規格書PDF中文資料

ACS704ELC-015屬于傳感器變送器的電流傳感器。由Allegro MicroSystems制造生產的ACS704ELC-015電流傳感器電流傳感器用于檢測并響應電線或電路中的電流變化。傳感器類型包括電流開關式、磁通門式、霍爾效應式、電流指示器、電流傳感器、磁調制器、磁阻式和變壓器式（帶調節功能），電流檢測范圍可編程設置在 5mA 至 2500A 之間，可用于測量交流或直流電流。

The Allegro ACS704 family of current sensors provides economical and precise solutions for current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.

The device consists of a precision, low-offset linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.

Features and Benefits

? Small footprint, low-profile SOIC8 package

? 1.5 mΩ internal conductor resistance

? Excellent replacement for sense resistors

? 800 VRMS minimum isolation voltage between pins 1-4 and 5-8

? 4.5 to 5.5 V, single supply operation

? 50 kHz bandwidth

? 100 mV/A output sensitivity and 20 A dynamic range

? Output voltage proportional to ac and dc currents

? Factory-trimmed for accuracy

? Extremely stable output offset voltage

? Near-zero magnetic hysteresis

? Ratiometric output from supply voltage