ACTS630HMSR中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

Features

? Devices QML Qualified in Accordance with MIL-PRF-38535

? Detailed Electrical and Screening Requirements are

Contained in SMD# 5962-96721 and Intersil’s QM Plan

? 1.25 Micron Radiation Hardened SOS CMOS

? Total Dose >300K RAD (Si)

? Single Event Upset (SEU) Immunity: <1 x 10-10 Errors/

Bit/Day (Typ)

? SEU LET Threshold>100 MEV-cm2/mg

? Dose Rate Upset>1011 RAD (Si)/s, 20ns Pulse

? Dose Rate Survivability>1012 RAD (Si)/s, 20ns Pulse

? Latch-Up Free Under Any Conditions

? Military Temperature Range-55oC to +125oC

? Significant Power Reduction Compared to ALSTTL

Logic

? DC Operating Voltage Range 4.5V to 5.5V

? Input Logic Levels

- VIL = 0.8V Max

- VIH = VCC/2 Min

? Input Current ? 1?A at VOL, VOH

? Fast Propagation Delay37ns (Max), 24ns (Typ)

Description

The Intersil ACTS630MS is a Radiation Hardened 16-bit parallel

error detection and correction circuit. It uses a modified Hamming code to generate a 6-bit check word from each 16-bit data

word. The check word is stored with the data word during a

memory write cycle; during a memory read cycle a 22-bit word is

taken form memory and checked for errors. Single bit errors in

the data words are flagged and corrected. Single bit errors in

check words are flagged but not corrected. The position of the

incorrect bit is pinpointed, in both cases, by the 6-bit error

syndrome code which is output during the error correction cycle.

The ACTS630MS utilizes advanced CMOS/SOS technology to

achieve high-speed operation. This device is a member of a

radiation hardened, high-speed, CMOS/SOS Logic Family.

The ACTS630MS is supplied in a 28 lead Ceramic Flatpack (K

suffix) or a 28 Lead Ceramic Dual-In-Line Package (D suffix).