AD13280集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD13280屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD13280模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD13280 is a complete, dual-channel, signal processing solution that includes on-board amplifiers, references, ADCs, and output termination components to provide optimized system performance. The AD13280 has on-chip track-and-hold circuitry and uses an innovative multipass architecture to achieve 12-bit, 80 MSPS performance. The AD13280 uses innovative high density circuit design and laser-trimmed thin-film resistor networks to achieve exceptional channel matching, impedance control, and performance while maintaining excellent isolation and providing for significant board area savings.

FEATURES

Dual 80 MSPS, minimum sample rate

Channel-to-channel matching, ±1 gain error

90 dB channel-to-channel isolation

DC-coupled signal conditioning

80 dB spurious-free dynamic range

Selectable bipolar inputs (±1 V and ±0.5 V ranges)

Integral single-pole, low-pass Nyquist filter

Twos complement output format

3.3 V compatible outputs

1.85 W per channel

APPLICATIONS

Radar processing (optimized for I/Q baseband operation)

Phased array receivers

Multichannel, multimode receivers

GPS antijamming receivers

Communications receivers