AD534KD集成電路（IC）的模擬乘法器、除法器規格書PDF中文資料

AD534KD屬于集成電路（IC）的模擬乘法器、除法器。由亞德諾半導體技術有限公司制造生產的AD534KD模擬乘法器、除法器模擬乘法器獲取兩個或更多模擬信號，并產生這些信號的乘積或乘積之和的輸出。此類電路可用于實現相關計算功能，例如計算平方（對兩個輸入都施加相同的信號）和平方根。應用可能包括可變增益放大器、環形調制器、乘積檢測器、混頻器、增益控制、真 RMS 轉換器和脈沖幅度調制器 (PAM)。

PRODUCT DESCRIPTION

The AD534 is a monolithic laser trimmed four-quadrant multiplier divider having accuracy specifications previously found only in expensive hybrid or modular products. A maximum

multiplication error of ±0.25 is guaranteed for the AD534L without any external trimming. Excellent supply rejection, low temperature coefficients and long term stability of the on-chip

thin film resistors and buried Zener reference preserve accuracy even under adverse conditions of use. It is the first multiplier to offer fully differential, high impedance operation on all inputs,

including the Z-input, a feature which greatly increases its flexibility and ease of use. The scale factor is pretrimmed to the standard value of 10.00 V; by means of an external resistor, this

can be reduced to values as low as 3 V.

FEATURES

Pretrimmed to 60.25 max 4-Quadrant Error (AD534L)

All Inputs (X, Y and Z) Differential, High Impedance for [(X1– X2) (Y1– Y2)/10 V] + Z2 Transfer Function

Scale-Factor Adjustable to Provide up to X100 Gain

Low Noise Design: 90mV rms, 10 Hz–10 kHz

Low Cost, Monolithic Construction

Excellent Long Term Stability

APPLICATIONS

High Quality Analog Signal Processing

Differential Ratio and Percentage Computations

Algebraic and Trigonometric Function Synthesis

Wideband, High-Crest rms-to-dc Conversion

Accurate Voltage Controlled Oscillators and Filters

Available in Chip Form