GENERAL DESCRIPTION

The AD7191 is a low noise, complete analog front end for high precision measurement applications. It contains a low noise, 24-bit sigma-delta (Σ-Δ) ADC. The on-chip low noise gain stage means that signals of small amplitude can be interfaced directly to the ADC. It contains two differential analog inputs. The part also includes a temperature sensor that can be used for temperature compensation.

FEATURES

Pin-programmable output rate

Output data rate: 10 Hz, 50 Hz, 60 Hz, 120 Hz

Pin-programmable PGA

Gain: 1, 8, 64, 128

Pin-programmable power-down and reset

RMS noise: 15 nV @ 10 Hz (gain = 128)

Up to 21.5 noise free bits (gain = 1)

Internal or external clock

Bridge power-down switch

Offset drift: 5 nV/°C

Gain drift: 1 ppm/°C

Specified drift over time

Simultaneous 50 Hz/60 Hz rejection

Internal temperature sensor

Power supply: 3 V to 5.25 V

Current: 4.35 mA

Temperature range: –40°C to +105°C

Package: 24-lead TSSOP

INTERFACE

2-wire serial

SPI, QSPI?, and MICROWIRE? compatible

Schmitt trigger on SCLK

APPLICATIONS

Weigh scales

Strain gauge transducers

Pressure measurement

Medical and scientific instrumentation

AD7191屬于集成電路（IC） > 模數轉換器（ADC）。亞德諾半導體技術有限公司制造生產的AD7191模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。