AD7450ARZ集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7450ARZ屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7450ARZ模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7450 is a 12-bit, high-speed, low power, successive approximation (SAR) analog-to-digital converter that features a fully differential analog input. It operates from a single 3 V or 5 V power supply and features throughput rates up to 833 kSPS or 1 MSPS, respectively.

This part contains a low noise, wide bandwidth, differential track and-hold amplifier (T/H) that can handle input frequencies in excess of 1 MHz with the –3 dB point typically being 20 MHz. The reference voltage for the AD7450 is applied externally to the VREF pin and can be varied from 100 mV to 3.5 V, depending on the power supply and what suits the application. The value of the reference voltage determines the common-mode voltage range of the part. With this truly differential input structure and variable reference input, the user can select a variety of input ranges and bias points.

FEATURES

Fast Throughput Rate: 1 MSPS

Specified for VDD of 3 V and 5 V

Low Power at Max Throughput Rate:

3.75 mW Max at 833 kSPS with 3 V Supplies

9 mW Max at 1 MSPS with 5 V Supplies

Fully Differential Analog Input

Wide Input Bandwidth:

70 dB SINAD at 300 kHz Input Frequency

Flexible Power/Serial Clock Speed Management

No Pipeline Delays

High-Speed Serial Interface—SPITM/QSPI? MICROWIRE?/DSP Compatible

Power-Down Mode: 1 μA Max

8-Lead μSOIC and SOIC Packages

APPLICATIONS

Transducer Interface

Battery-Powered Systems

Data Acquisition Systems

Portable Instrumentation

Motor Control

Communications