AD7621集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7621屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7621模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The ADA4940-1/ADA4940-2 are low noise, low distortion fully differential amplifiers with very low power consumption. They are an ideal choice for driving low power, high resolution, high performance SAR and sigma-delta (Σ-Δ) analog-to-digital converters (ADCs) with resolutions up to 16 bits from dc to 1 MHz on only 1.25 mA of quiescent current. The adjustable level of the output common-mode voltage allows the ADA4940-1/ADA4940-2 to match the input common-mode voltage of multiple ADCs. The internal common-mode feedback loop provides exceptional output balance, as well as suppression of even-order harmonic distortion products.

FEATURES

Small signal bandwidth: 260 MHz

Ultralow power 1.25mA

Extremely low harmonic distortion

?122 dB THD at 50 kHz

?96 dB THD at 1 MHz

Low input voltage noise: 3.9 nV/√Hz

0.35 mV maximum offset voltage

Balanced outputs

Settling time to 0.1: 34 ns

Rail-to-rail output: ?VS + 0.1 V to +VS ? 0.1 V

Adjustable output common-mode voltage

Flexible power supplies: 3 V to 7 V (LFCSP)

Disable pin to reduce power consumption

ADA4940-1 is available in LFCSP and SOIC packages