AD7683BRM集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7683BRM屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7683BRM模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7683 is a 16-bit, charge redistribution, successive approximation, PulSAR? analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.7 V and 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes (B grade), an internal conversion clock, and a serial, SPI-compatible interface port. The part also contains a low noise, wide bandwidth, short aperture delay, track-and-hold circuit. On the CSfalling edge, it samples an analog input, +IN, between 0 V to REF with respect to a ground sense, –IN. The reference voltage, REF, is applied externally and can be set up to the supply voltage. Its power scales linearly with throughput. The AD7683 is housed in an 8-lead MSOP or an 8-lead QFN

(LFCSP) package, with an operating temperature specified from ?40°C to +85°C.

FEATURES

16-bit resolution with no missing codes

Throughput: 100 kSPS

INL: ±1 LSB typical, ±3 LSB maximum

Pseudo differential analog input range

0 V to VREFwith VREFup to VDD

Single-supply operation: 2.7 V to 5.5 V

Serial interface SPI/QSPI/MICROWIRE/DSP compatible

Power dissipation: 4 mW @ 5 V, 1.5 mW @ 2.7 V,

150 μW @ 2.7 V/10 kSPS

Standby current: 1 nA

8-lead packages:

MSOP

3 mm × 3 mm QFN (LFCSP) (SOT-23 size)

Improved second source to ADS8320 and ADS8325

APPLICATIONS

Battery-powered equipment

Data acquisition

Instrumentation

Medical instruments

Process control