AD8436ACPZ-R7集成電路（IC）的RMS至DC轉換器規格書PDF中文資料

AD8436ACPZ-R7屬于集成電路（IC）的RMS至DC轉換器。由亞德諾半導體技術有限公司制造生產的AD8436ACPZ-R7RMS 至 DC 轉換器RMS 至 DC 轉換器產品族中的產品可用于執行測量時變波形的數學功能，并返回一個與等效穩態 (DC) 值成比例的值，如果將其應用于電阻負載，則會產生相同的功率耗散。這些轉換器通常用于交流電源相關應用中的測量，它們之間以及它們與用于類似終端的其他技術之間的區別在于輸入為非正弦波形時所給出結果的準確性。

GENERAL DESCRIPTION

The AD8436 is a new generation, translinear precision, low power, true rms-to-dc converter loaded with options. It computes a precise dc equivalent of the rms value of ac waveforms, including complex patterns such as those generated by switch mode power supplies and triacs. Its accuracy spans a wide range of input levels (see Figure 2) and temperatures. The ensured accuracy of ≤±0.5 and ≤10 μV output offset result from the latest Analog Devices, Inc., technology. The crest factor error is <0.5 for CF values between 1 and 10.

The AD8436 delivers true rms results at less cost than misleading peak, averaging, or digital solutions. There is no programming expense or processor overhead to consider, and the 4 mm ? 4 mm package easily fits into tight applications. On-board buffer amplifiers enable the widest range of options for any rms-to-dc converter available, regardless of cost. For minimal applications, only a single external averaging capacitor is required. The built-in high impedance FET buffer provides an interface for external attenuators, frequency compensation, or driving low impedance loads. A matched pair of internal resistors enables an easily configurable gain-of-two or more, extending the usable input range even lower. The low power, precision input buffer makes the AD8436 attractive for use in portable multi-meters and other battery-powered applications.

FEATURES

Delivers true rms or average rectified value of ac waveform

Fast settling at all input levels

Accuracy: ±10 μV ± 0.25 of reading (B grade)

Wide dynamic input range

100 μV rms to 3 V rms (8.5 V p-p) full-scale input range

Larger inputs with external scaling

Wide bandwidth:

1 MHz for ?3 dB (300 mV)

65 kHz for additional 1 error

Zero converter dc output offset

No residual switching products

Specified at 300 mV rms input

Accurate conversion with crest factors up to 10

Low power: 300 μA typical at ±2.4 V

High-Z FET separately powered input buffer

RIN ≥ 1012 Ω, CIN ≤ 2 pF

Precision dc output buffer

Wide power supply voltage range

Dual: ±2.4 V to ±18 V; single: 4.8 V to 36 V

4 mm × 4 mm LFCSP and 8 mm × 6 mm QSOP packages

ESD protected