AD8557中文資料亞德諾數據手冊PDF規(guī)格書

GENERAL DESCRIPTION

The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000.

The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground can be amplified without requiring dual supplies. The AD8426 operates on supplies ranging from ±1.35 V to ±18 V for dual supplies and 2.2 V to 36 V for a single supply.

The robust AD8426 inputs are designed to connect to real world sensors. In addition to its wide operating range, the AD8426 can handle voltages beyond the rails. For example, with a ±5 V supply, the part is guaranteed to withstand ±35 V at the input with no damage. Minimum and maximum input bias currents are specified to facilitate open-wire detection.

FEATURES

2 channels in a small, 4 mm × 4 mm LFCSP

LFCSP package has no metal pad

More routing room

No current leakage to pad

Gain set with 1 external resistor

Gain range: 1 to 1000

Input voltage goes below ground

Inputs protected beyond supplies

Very wide power supply range

Single supply: 2.2 V to 36 V

Dual supply: ±1.35 V to ±18 V

Bandwidth (G = 1): 1 MHz

CMRR (G = 1): 80 dB minimum

Input noise: 24 nV/√Hz

Typical supply current (per amplifier): 350 μA

Specified temperature range: ?40°C to +125°C

APPLICATIONS

Industrial process controls

Bridge amplifiers

Medical instrumentation

Portable data acquisition

Multichannel systems