GENERAL DESCRIPTION

The AD9523 provides a low power, multi-output, clock distribution function with low jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 3.6 GHz to 4.0 GHz.

FEATURES

Output frequency: <1 MHz to 1 GHz

Start-up frequency accuracy: <±100 ppm (determined by

VCXO reference accuracy)

Zero delay operation

Input-to-output edge timing: <150 ps

14 outputs: configurable LVPECL, LVDS, HSTL, and LVCMOS

14 dedicated output dividers with jitter-free adjustable delay

Adjustable delay: 63 resolution steps of ? period of VCO

output divider

Output-to-output skew: <50 ps

Duty cycle correction for odd divider settings

Automatic synchronization of all outputs on power-up

Absolute output jitter: <200 fs at 122.88 MHz

Integration range: 12 kHz to 20 MHz

Distribution phase noise floor: ?160 dBc/Hz

Digital lock detect

Nonvolatile EEPROM stores configuration settings

SPI- and I2C-compatible serial control port

Dual PLL architecture

PLL1

Low bandwidth for reference input clock cleanup with

external VCXO

Phase detector rate up to130 MHz

Redundant reference inputs

Automatic and manual reference switchover modes

Revertive and nonrevertive switching

Loss of reference detection with holdover mode

Low noise LVCMOS output from VCXO used for RF/IF

synthesizers

PLL2

Phase detector rate up to 259 MHz

Integrated low noise VCO

APPLICATIONS

LTE and multicarrier GSM base stations

Wireless and broadband infrastructure

Medical instrumentation

Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs

Low jitter, low phase noise clock distribution

Clock generation and translation for SONET, 10Ge, 10G FC,

and other 10 Gbps protocols

Forward error correction (G.710)

High performance wireless transceivers

ATE and high performance instrumentation

AD9523屬于開發板，套件，編程器 > 評估和演示板及套件。亞德諾半導體技術有限公司制造生產的AD9523評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。