ADC3642集成電路（IC）的模數(shù)轉(zhuǎn)換器（ADC）規(guī)格書PDF中文資料

1 Features

? Dual channel

? 14-bit 10/25/65 MSPS ADC

? Noise floor: –155 dBFS/Hz

? Ultra-low power with optimized power scaling:

29 mW/ch (10 MSPS) to 72 mW/ch (65 MSPS)

? Latency: 1 clock cycle

? 14-Bit, no missing codes

? INL: ±0.6 LSB; DNL: ±0.2 LSB

? Reference: external or internal

? Industrial temperature range: –40°C to +105°C

? On-chip digital filter (optional)

– Decimation by 2, 4, 8, 16, 32

– 32-bit NCO

? DDR and Serial CMOS interface

? Small footprint: 40-VQFN (5 mm × 5 mm) package

? Single 1.8-V supply

? Spectral performance (fIN = 5 MHz):

– SNR: 79.0 dBFS

– SFDR: 93-dBc HD2, HD3

– SFDR: 101-dBFS worst spur

? Spectral performance (fIN = 64 MHz):

– SNR: 74.0 dBFS

– SFDR: 84-dBc HD2, HD3

– SFDR: 90-dBFS worst spur

2 Applications

? High-speed data acquisition

? Industrial monitoring

? Thermal imaging

? Imaging and sonar

? Software defined radio

? Power quality

? Communications infrastructure

? High-speed control loops

? Instrumentation

? Smart grids

? Spectroscopy

? Radar

? Source measurement unit (SMU)

? GPS receiver

? Sonar

? Substation automation

3 Description

The ADC364x family of devices are low-noise,

ultra-low power, 14-bit, 10-MSPS to 65-MSPS

dual-channel, high-speed analog-to-digital converters

(ADCs). Designed for low power consumption, these

devices deliver a noise spectral density of –155

dBFS/Hz, combined with excellent linearity and

dynamic range. The ADC364x offers very good dc

precision, together with IF sampling support, which

make the device an excellent choice for a wide range

of applications. High-speed control loops benefit from

the short latency of only one clock cycle. The ADC

consumes only 72 mW/ch at 65 MSPS, and power

consumption scales well with lower sampling rates.

The ADC364x use a DDR or serial CMOS interface to

output the data offering lowest power digital interface,

together with flexibility to minimize the number of

digital interconnects. These devices are a pin-to-pin

compatible family with different speed grades. These

devices support the extended industrial temperature

range of –40 to +105?C.