ADE7762ARWZ-RL集成電路（IC）的電能計量規格書PDF中文資料

ADE7762ARWZ-RL屬于集成電路（IC）的電能計量。由亞德諾半導體技術有限公司制造生產的ADE7762ARWZ-RL電能計量能量計量集成電路可用于單相、雙相和三相電力線系統中的高精度電能測量。這些器件可以測量線路電壓和電流，并且可以計算有功、無功和視在電能，以及瞬時均方根電壓和電流。

GENERAL DESCRIPTION

The ADE77621 is a high accuracy polyphase electrical energy measurement IC. The ADE7762 specifications surpass the accuracy requirements as quoted in the IEC62053-21 standard.

The only analog circuitry used in the ADE7762 is in the analog-to-digital converters (ADCs) and reference circuit. All other signal processing (for example, multiplication, filtering, and summation) is carried out in the digital domain. This approach provides superior stability and accuracy over extremes in environmental conditions and over time.

FEATURES

High accuracy supports 50 Hz/60 Hz IEC62053-21

Less than 0.1 error over a dynamic range of 500 to 1

Compatible with 3-phase 3-wire delta and 3-phase 4-wire Wye

configurations

Supplies average active power on the frequency outputs F1 and F2

High frequency output (CF) is intended for calibration and

supplies instantaneous active power

Logic output REVP indicates a potential miswiring or negative

power on the sum of all phases

Dropout indication for each phase on LED driver pins

Phase sequence error detection

Direct drive for electromechanical counters and 2-phase stepper

motors (F1 and F2)

Proprietary ADCs and DSP provide high accuracy over large

variations in environmental conditions and time

On-chip power supply monitoring

On-chip creep protection (no load threshold)

On-chip reference 2.4 V ± 8 (25 ppm/°C typical) with external

overdrive capability

Single 5 V supply, low power (TBD mW typical)

Low cost CMOS process