GENERAL DESCRIPTION

The ADG3246 is a 2.5 V or 3.3 V, 10-bit, 2-port digital switch. It

is designed on Analog Devices’ low voltage CMOS process, which

provides low power dissipation yet gives high switching speed

and very low on resistance, allowing inputs to be connected to outputs

without additional propagation delay or generating additional

ground bounce noise.

The switches are enabled by means of the bus enable (BE)

input signal. These digital switches allow bidirectional signals to

be switched when ON. In the OFF condition, signal levels up to the

supplies are blocked.

This device is ideal for applications requiring level translation. When

operated from a 3.3 V supply, level translation from 3.3 V inputs

to 2.5 V outputs occurs. Similarly, if the device is operated from a

2.5 V supply and 2.5 V inputs are applied, the device will translate

the outputs to 1.8 V. In addition to this, the ADG3246 has a level

translating select pin (SEL). When SEL is low, VCC is reduced

internally, allowing for level translation between 3.3 V inputs and 1.8

V outputs. This makes the device suited to applications requiring

level translation between different supplies, such as converter to

DSP/microcontroller interfacing.

FEATURES

? 225 ps Propagation Delay through the Switch

? 4.5 Ω Switch Connection between Ports

? Data Rate 1.244 Gbps

? 2.5 V/3.3 V Supply Operation

? Selectable Level Shifting/Translation

? Small Signal Bandwidth 610 MHz

? Level Translation

? 3.3 V to 2.5 V

? 3.3 V to 1.8 V

? 2.5 V to 1.8 V

? 24-Lead LFCSP Package

APPLICATIONS

? 3.3 V to 1.8 V Voltage Translation

? 3.3 V to 2.5 V Voltage Translation

? 2.5 V to 1.8 V Voltage Translation

? Bus Switching

? Bus Isolation

? Hot Swap

? Hot Plug

? Analog Signal Switching

ADG3246BCPZ屬于集成電路（IC） > 信號開關，多路復用器，解碼器。亞德諾半導體技術有限公司制造生產的ADG3246BCPZ信號開關，多路復用器，解碼器邏輯型信號開關、多路復用器和編碼器 IC 可用于對以數字格式表示數據的電信號進行路由和選擇。這些器件與設計用于模擬信號的類似產品有所不同，它們保留的信息表示為兩個電狀態之一，而不是兩個外部界限內的無窮變化量。