GENERAL DESCRIPTION

The ADG3308/ADG3308-1 are bidirectional level translators

containing eight bidirectional channels. They can be used in

multivoltage digital system applications, such as a data transfer

between a low voltage DSP controller and a higher voltage device. The internal architecture allows the device to perform

bidirectional level translation without an additional signal to set the direction in which the translation takes place. The voltage applied to VCCA sets the logic levels on the A side of the device, and VCCY sets the levels on the Y side. For proper operation, VCCA must always be less than VCCY. The VCCA

compatible logic signals applied to the A side of the device

appear as VCCY compatible levels on the Y side. Similarly, VCCY compatible logic levels applied to the Y side of the device appear as VCCA compatible logic levels on the A side. The enable pin (EN) provides three-state operation on both the

A side and the Y side pins. When the EN pin is pulled low, the

terminals on both sides of the device are in the high impedance state. For normal operation, EN should be driven high.

The ADG3308 is available in a compact 20-lead TSSOP and a 20-lead LFCSP. The ADG3308-1 is available in a 20-ball WLCSP. The EN pin is referred to the VCCY supply voltage for the ADG3308 and to the VCCA supply voltage for the ADG3308-1.

The ADG3308/ADG3308-1 are guaranteed to operate over the 1.15 V to 5.5 V supply voltage range and the extended ?40°C to +85°C temperature range.

FEATURES

Bidirectional logic level translation

Operates from 1.15 V to 5.5 V

Low quiescent current < 1 μA

No direction pin

APPLICATIONS

Low voltage ASIC level translation

Smart card readers Cell phones and cell phone cradles Portable communication devices

Telecommunications equipment

Network switches and routers

Storage systems (SAN/NAS) Computing/server applications

GPS

Portable POS systems Low cost serial interfaces

ADG3308BCBZ-1-REEL屬于集成電路（IC） > 轉換器，電平移位器。亞德諾半導體技術有限公司制造生產的ADG3308BCBZ-1-REEL轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。