ADGS2414DBCCZ-RL7中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADGS2414D contains eight independent, low on-resistance,

single-pole/single-throw (SPST) switches in a 4 mm x 5 mm, 30 pin

LGA package.

The ADGS2414D enables higher channel density in systems where

printed circuit board space is constrained or existing system form

factors restrict expansion.

When using SPI daisy-chain mode, the unique route through pins,

provide considerable space savings when multiple ADGS2414D

instances are combined to design very high channel count systems,

such as large switching matrices and fanout applications. The

integrated supply decoupling capacitors and SDO pullup resistor

further increase the space savings and reduce printed circuit board

complexity.

The low on-resistance (0.56 Ω typical) of each switch channel

allows for higher current density in systems where heat dissipation

is an issue, and the on-resistance profile of the switch channels is

exceptionally flat over the full-analog input range, which ensures

good linearity and low distortion when switching precision analog

signals.

Each switch has an input signal range from VSS to VDD – 2 V. When

on, each switch conducts equally well in both directions, and in the

off condition, signal levels up to the supplies are blocked.

The SPI has robust error detection features, such as cyclic redundancy

check (CRC) error detection, invalid read and write address

detection, and SCLK count error detection.

FEATURES

? 0.56 Ω typical on resistance

? High continuous current of up to 768 mA

? Flat RON across signal range, 0.004 Ω

? THD of -122 dB at 1 kHz

? Route through pins for digital signals and supplies

? Integrated passive components

? SPI interface with error detection

? Guaranteed break-before-make switching, allowing external wiring

of switches to deliver multiplexer configurations

? Fully specified at ±15 V and +12 V

? 1.8 V logic compatibility with 2.7 V ≤ VL ≤ 3.3 V (excludes SPI

read-back to a 1.8 V device)

? 4 mm × 5 mm, 30-terminal LGA

APPLICATIONS

? Automatic test equipment

? Instrumentation

? Data acquisition

? Relay replacement

? Avionics

? Audio and video switching

? Communication systems