ADM1067ASU集成電路（IC）的監控器規格書PDF中文資料

ADM1067ASU屬于集成電路（IC）的監控器。由亞德諾半導體技術有限公司制造生產的ADM1067ASU監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

GENERAL DESCRIPTION

The ADM1067 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1067 integrates six 8-bit voltage output DACs. These circuits can be used to implement an open-loop margining system, which enables supply adjustment by altering either the feedback node or reference of a dc-to-dc converter using the DAC outputs.

FEATURES

Complete supervisory and sequencing solution for up to

10 supplies

10 supply fault detectors enable supervision of supplies to

<0.5 accuracy at all voltages at 25°C

<1.0 accuracy across all voltages and temperatures

5 selectable input attenuators allow supervision

Supplies up to 14.4 V on VH

Supplies up to 6 V on VPn (VP1 to VP4)

5 dual-function inputs, VXn (VX1 to VX5)

High impedance input to supply fault detector with

thresholds between 0.573 V and 1.375 V

General-purpose logic input

10 programmable output drivers (PDO1 to PDO10)

Open collector with external pull-up

Push/pull output, driven to VDDCAP or VPn

Open collector with weak pull-up to VDDCAP or VPn

Internally charge-pumped high drive for use with external

N-FET (PDO1 to PDO6 only)

Sequencing engine (SE) implements state machine control of

PDO outputs

State changes conditional on input events

Enables complex control of boards

Power-up and power-down sequence control

Fault event handling

Interrupt generation on warnings

Watchdog function can be integrated in SE

Program software control of sequencing through SMBus

Open-loop margining solution for 6 voltage rails

6 voltage output 8-bit DACs (0.300 V to 1.551 V) allow

voltage adjustment via dc-to-dc converter trim/feedback

node

Device powered by the highest of VPn, VH for improved

redundancy

User EEPROM: 256 bytes

Industry-standard 2-wire bus interface (SMBus)

Guaranteed PDO low with VH, VPn = 1.2 V

Available in 2 packages

40-lead, 6 mm × 6 mm LFCSP

48-lead, 7 mm × 7 mm TQFP

APPLICATIONS

Central office systems

Servers/routers

Multivoltage system line cards

DSP/FPGA supply sequencing

In-circuit testing of margined supplies