GENERAL DESCRIPTION

The ADM1170 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is used to enhance the gate of the N-channel FET. When an overcurrent condition is detected, the gate voltage of the FET is reduced to limit the current flowing through the sense resistor.

FEATURES

Controls supply rails from 1.6 V to 16.5 V

Supply voltage range from 2.7 V to 16.5 V

Allows protected board removal and insertion to a live

backplane

External sense resistor provides adjustable analog current

limit with circuit breaker

Soft start controls inrush current profile

Peak fault current limited with fast response

Charge pumped gate drive for external N-FET switch

Automatic retry or latch-off during current fault

Undervoltage lockout

8-lead, TSOT package

APPLICATIONS

Hot swap board insertion: line cards, raid systems

Industrial high-side switches/circuit breakers

Electronic circuit breakers

ADM1170屬于集成電路（IC） > 熱插拔控制器。亞德諾半導體技術有限公司制造生產的ADM1170熱插拔控制器PMIC - 熱插拔控制器是能提供電路內保護和控制功能的半導體，可允許帶電情況下在電路中插入或拔除其他組件。熱插拔控制器可用于計算機網絡和通用電源系統，主要根據輸出電流、受控通道數量等特性，以及自動重試、故障超時和保護等特殊功能進行區分。