ADM202JRW集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM202JRW屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM202JRW驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM202 is a 2-channel RS-232 line driver/receiver pair designed to operate from a single 5 V power supply. A highly efficient on-chip charge pump design permits RS-232 levels to be developed using charge pump capacitors as small as 0.1 μF. This converter generates ±10 V RS-232 output levels.

The ADM202 meets or exceeds the TIA/EIA-232-E and V.28 specifications. Fast driver slew rates permit 120 kB operation, and high drive currents allow extended cable lengths.

An epitaxial BiCMOS construction minimizes power consumption to 10 mW and guards against latch-up. Overvoltage protection is provided, allowing the receiver inputs to withstand continuous voltages in excess of ±30 V. In addition, all pins contain ESD protection to levels greater than 2 kV.

The ADM202 is available in a 16-lead PDIP and both narrow and wide 16-lead SOIC packages.

FEATURES

120 kB transmission rate

Small (0.1 μF) charge pump capacitors

Single 5 V power supply

Meets TIA/EIA-232-E and V.28 specifications

2 drivers and 2 receivers

On-board dc-to-dc converters

±9 V output swing with 5 V supply

Low power BiCMOS: 2.5 mA ICC

±30 V receiver input levels

APPLICATIONS

Computers

Peripherals

Modems

Printers

Instruments