ADM2463EBRWZ-RL7集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM2463EBRWZ-RL7屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM2463EBRWZ-RL7驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM2461E/ADM2463E are 500 kbps, 5.7 kV rms, signal

isolated RS-485 transceivers that pass radiated emissions testing to

the EN55032 Class B standard with margin on a 2-layer printed

circuit board (PCB). The ADM2461E/ADM2463E isolation barrier provides robust immunity to noise and system level EMC

events. The devices are protected against ≥±12 kV contact and ≥ ±15 kV air IEC61000-4-2 electrostatic discharge (ESD) events

on the RS-485 A, B, Y, and Z pins. The devices feature cable invert

pins to allow quick correction of the reversed cable connection

on the A, B, Y, and Z bus pins while maintaining full receiver

fail-safe performance.

These devices are optimized for low speed over long cable runs and have a maximum data rate of 500 kbps. The high differential

output voltage makes these devices suitable for Profibus nodes

when powered with 5 V on the VDD2 supply. The VDD1 primary

supply and VDD2 isolated supply both support a wide range of

voltages (1.7 V to 5.5 V and 3 V to 5.5 V, respectively). Half-

duplex and full duplex device options are available in the industry standard 16-lead, wide-body, standard SOIC_W package with >8.0 mm creepage and clearance.

FEATURES

5.7 kV rms, signal isolated RS-485/RS-422 transceiver

Low radiated emissions, passes EN55032 Class B with margin on a 2-layer PCB

Cable inversion smart feature Correction for reversed cable connection on A, B, Y, and Z bus

pins while maintaining full receiver fail-safe ESD protection on the RS-485 A, B, Y, and Z bus pins

≥±12 kV IEC61000-4-2 contact discharge ≥±15 kV IEC61000-4-2 air discharge

Low speed 500 kbps data rate for EMI control Flexible power supply inputs

Primary VDD1 supply of 1.7 V to 5.5 V Isolated VDD2 supply of 3.0 V to 5.5 V Profibus? compliant for 5 V VDD2

Wide ?40°C to +125°C operating temperature range High common-mode transient immunity: >250 kV/μs Short-circuit, open-circuit, and floating input receiver fail-safe Supports 192 bus nodes (72 kΩ receiver input impedance) Full hot swap support (glitch free power-up and power-down) Safety and regulatory approvals (pending)

CSA Component Acceptance Notice 5A, DIN V VDE V 0884-11,

UL 1577, CQC11-471543-2012, IEC 61010-1 16-lead, wide body, SOIC_W package with >8.0 mm

creepage and clearance in standard pinout

APPLICATIONS

Heating, ventilation, and air conditioning (HVAC) networks

Industrial field buses Building automation

Utility networks