ADM3051CRZ集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM3051CRZ屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM3051CRZ驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM3051 is a controller area network (CAN) physical

layer transceiver allowing a protocol layer CAN controller to access the physical layer bus. The ADM3051 complies with the ISO 11898 standard. It is capable of running at data rates up to 1 Mbps. The device has current-limiting and thermal shutdown features

to protect against output short circuits and situations where the

bus may be shorted to ground or power terminals in 24 V bus power systems. The part is fully specified over the industrial

temperature range of ?40°C to +125°C and is available in an 8-lead SOIC package.

Three operating modes are available: high speed, slope control, and standby. Pin 8 (RS) is used to select the operating mode.

The low current standby mode can be selected by applying a

logic high to RS. The device can be set to operate with slope control to limit EMI

by connecting RS with a resistor to ground to modify the rise and fall of slopes. This mode facilitates the use of unshielded cables. Alternatively, disabling slope control by connecting RS to ground allows high speed operation. Shielded cables or other measures to control EMI are necessary in this mode.

FEATURES Physical layer CAN transceiver

5 V operation on VCC

Complies with ISO 11898 standard High speed data rates up to 1 Mbps Short-circuit protection on CANH and CANL against shorts to

power/ground in 24 V systems Unpowered nodes do not disturb the bus Connect 110 or more nodes on the bus Slope control for reduced EMI Thermal shutdown protection Low current standby mode

Industrial operating temperature range (?40°C to +125°C) Available in 8-lead SOIC package

APPLICATIONS

CAN data buses

Industrial field networks DeviceNet applications

CanOpen, CanKingdom