ADM3058E集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM3058E屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM3058E驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM3058E is a 5.7 kV rms isolated controller area

network (CAN) physical layer transceiver with a high perfor-

mance, basic feature set. The ADM3058E fully meets the CAN flexible data rate (CAN FD) ISO 11898-2:2016 requirements and is further capable of supporting data rates as high as 12 Mbps. The device employs Analog Devices, Inc., iCoupler? technology to combine a 2-channel isolator and a CAN transceiver into a

single small outline integrated circuit (SOIC) surface-mount

package. The ADM3058E is a fully isolated solution for CAN

and CAN FD applications. The ADM3058E provides isolation

between the CAN controller and physical layer bus. Safety and

regulatory approvals (pending) for a 5.7 kV rms withstand voltage

and a 1500 V peak working voltage ensure that the ADM3058E

meets application isolation requirements. Low loop propagation delays and the extended common-mode range of ±25 V support robust communication on longer bus

cables. Dominant timeout functionality protects against bus

lock up in a fault condition, and current limiting and thermal

shutdown features protect against output short circuits. The

CAN bus input and output pins are protected to ±40 V against accidental connection to a +24 V bus supply. The device is fully

specified over the ?40°C to +125°C industrial temperature range.

FEATURES

5.7 kV rms signal isolated CAN FD transceiver 1500 V peak and dc working voltage to DIN VDE 0884-11 1.7 V to 5.5 V supply and logic side levels 4.5 V to 5.5 V supply on bus side ISO 11898-2:2016-compliant CAN FD Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 155 ns

Extended common-mode range: ±25 V Bus fault protection (CANH, CANL): ±40 V ESD protection on the CANH and CANL bus pins

≥±8 kV IEC 61000-4-2 contact discharge

≥±15 kV IEC 61000-4-2 air discharge

Passes EN 55022, Class B by 6 dB

Safety and regulatory approvals (pending)

UL: 5700 V rms for 1-minute per UL 1577 CSA Component Acceptance 5A at 5.7 kV rms

IEC 60601 and IEC 61010 VDE Certificates of Conformity DIN VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 1500 V peak

High common-mode transient immunity: >50 kV/μs

Industrial operating temperature range: ?40°C to +125°C

APPLICATIONS

CANOpen, DeviceNet, and other CAN bus implementations

Industrial automation

Process control and building control Transport and infrastructure